Skip to main content

How to Plant, Grow, and Harvest Garlic Bulbs

Garlic is one of the easiest and most satisfying crops for home vegetable gardeners to grow. It yields two useful crops; the garlic bulbs themselves, and delicious green “scapes” a month earlier. Because it is usually planted in the fall and begins to grow early in the spring, garlic provides the garden with something green and encouraging, long before other crops have germinated.

About garlic

Freshly harvested garlic, ready for curing.

Garlic (Allium sativa) is a member of the onion family. Garlic varieties are classified into softneck and hardneck (also known as topset) varieties. Hardneck varieties produce a false flower stalk called a scape, and generally produce fewer, larger cloves than softneck varieties. As a general rule, hardneck varieties are hardier and better able to withstand our cold winters than softneck varieties. Softneck varieties are required if you plan to braid your garlic.

Starting materials

Garlic doesn’t produce flowers or seeds. The individual cloves from heads of garlic are separated and planted. Garlic purchased in supermarkets is usually softneck garlic. These cultivars are not necessarily well adapted to our climate. You can purchase seedstock from local farmer, or from seed suppliers that will ship seed garlic. Plant only clean seed; any cloves showing evidence of mold or other damage should be discarded. If you are saving your own garlic seed stock, set aside the largest, best-shaped heads for seed and eat the smaller heads.

Varieties that consistently do well in Northern New England include ‘Music’, ‘German Extra Hardy’, and ‘Russian Red’. Varieties are not standardized, and they evolve with selection, so the same variety purchased from different sources may perform differently. Locally produced seed garlic is often a good way to start, since you can be assured that the varieties will do well in your climate.

Soil preparation

Garlic requires reasonably fertile soil and grows best in a well-drained soil with plenty of organic matter. The pH of a typical vegetable garden, 6.0-7.0, is ideal for garlic. Follow soil test recommendations based on your garden site. If you don’t have soil test results, apply two pounds of a 10% nitrogen fertilizer (such as 10-10-10) per 100 square feet before planting. In the early spring, once the garlic has started to grow, garlic will benefit from additional fertilization with a liquid feed.

Planting

Garlic grows well in cool temperatures. In Northern New England, garlic is most successfully planted in the fall. The ideal planting time ranges from October (for Northern sites) to November (for more Southern sites). As with fall-planted flower bulbs, it is best to allow enough time for the bulbs to start to grow roots but not long enough for the shoots to start to grow before winter. If shoots start to grow in the fall, don’t worry. In most cases, the garlic will survive the winter and emerge unscathed in the spring.

Garlic plants emerging through straw mulch in early spring.

Individual cloves should be planted, pointed-side up, 2 to 3 inches deep. Cloves can be planted in rows or in beds of several rows, but there should be at least 6 inches of space between neighbors on all sides. Remember that each clove will become an entire head of garlic! Once the ground is frozen, add mulch to prevent frost-heaving and to control weeds the next spring. A 4-inch layer of grass clippings, leaves or straw will work well. In the spring, make sure the plants are able to emerge through the mulch. If you can see that some are not making it through, you can poke around and loosen up the mulch to help them.

Did you miss fall planting? Although not as reliable as planting in the fall, if the weather is favorable, cloves planted in the very early spring (March-April) can develop into mature heads for a mid-summer harvest. If you have sprouting cloves from garlic you have overwintered, go ahead and plant them – you have very little to lose!

Harvesting and storing

Usually during June, hardneck garlic plants send up a false flower stalk, or “scape.” This stalk is straight when it emerges, it then curls around to form an attractive swirl shape, and finally it straightens again. At the top of the scape, where you would expect to see a flower, garlic will instead form many tiny bulbs called “bulbils.”

Garlic curing in a rack made of mesh wire and 2 x 4 lumber.

Most growers remove the scapes when they curl. This is for two reasons. First, removing the scapes will allow larger garlic heads to form, because the plant will have more energy to send to the head. Second, the scapes themselves are a delicacy. They have a mild garlic flavor when cooked, and a strong garlic flavor when eaten raw. They can be used in the same way that garlic is used, but also make wonderful stir-fries and garlic-scape pesto. Scapes are most tender if harvested before they straighten.

The garlic bulbs are ready for harvest when the lower third of the leaves on the plant have turned yellow, usually between late June and mid-July. Gently loosen the bulbs by using a fork or spade underneath them, and gently brush off excess soil. Be careful not to bang the garlic around during harvest or curing. Any wounds or bruises predispose the garlic heads to disease during storage.

Place the garlic, with tops intact, in a dry location with good ventilation (attics, garages, and barns work well) to cure for several weeks. Once the garlic is dry, cut the tops down to about 1 inch in length, trim the roots, and gently rub to clean them. Garlic should be stored in a cool (just above 32°F), dry location. Depending on the variety and storage conditions, garlic will keep for 6 to 7 months.

Pests and problems

Viruses, nematodes and fungi are the most common pests that plague garlic. All can negatively affect the yields and keeping quality of garlic. For all of these, prevention is the best strategy to minimize these problems. Start with clean seedstock, avoid growing garlic in wet areas or in exactly the same spot of soil from year to year, and be gentle during harvest and curing.

Written by UNH Cooperative Extension Specialist Becky Sideman.

June 2011

Visit our website: https://extension.unh.edu/

UNH Cooperative Extension programs and policies are consistent with pertinent Federal and State laws and regulations on non-discrimination regarding age, color, handicap, national origin, race, religion, sex, sexual orientation, or veterans status.

Comments

Popular posts from this blog

How to kill rats in your poultry house - using a mixture of baking soda, flour and sugar

Rats are dangerous animals in the poultry house and they cause problems both direct and indirect. Direct - they eat chicks or kill chicks rapidly. Indirect - they carry many diseases that affect chicks. Therefore, their presence in the poultry house is a big risk. However, it is a bit hard to control rats in the poultry house because most of the chemicals that kill rats are harmful to our birds. Nevertheless, today we shall break the secret on how to kill rats using safe methods. Remember I am an organic poultry farmer and I promote organic methods all the time. So now, let us see how to solve this rat issue. Organic method of getting rid of rats on farms and at home: Mix baking soda + flour + sugar at equal ratios 1:1:1. Mix thoroughly dry. Put them in small containers and place them at the corners of your poultry house. They will eat it and never return to disturb you again. If you have a small bowl of that size, you can also use it. Rats love flour and so will golf it. Secondly, t

Complete Guide To Chicken Feed Formulation

The common ingredients are whole maize, maize bran, cotton seed cake, soya beans, sunflower and fishmeal (omena). In addition, farmers need to add several feed additives (micronutrients, minerals and vitamins) to ensure their birds have a balanced feed that meets their daily nutrient requirements. Ingredients are cheaply available, especially after the harvesting season. Depending on the cost of ingredients, farmers who make their own feeds at home save between 30 to 50% for every 70kg bag of chicken feed, depending on the source of their raw materials. Due to government regulation, major feed companies have reduced the standard quantity of feed from 70kg to 50kg per bag, but the price of feed still remains almost the same. This means that farmers who are able to make their own feeds make great savings on feeds which take up to 80% of the production costs. To formulate feed, farmers have to use the Pearson Square Method . In this method, the Digestible Crude Protein (DCP) is

Hilling potatoes: why it is important

The main reason to hill potatoes is to increase yield. Potatoes form along the underground stem of the plant and not from the roots. So hilling effectively lengthen the underground portion of the stem thus increasing yield. You can either add additional soil to the bed and then mound it around the plants, or you can scoop up soil from the rows and press it against the stems. Later in the season, it’s easy to reach in and check the potatoes for size before you harvest them. After the plants reach about 20 to 30cm tall, soil needs to be hilled around the plants for the potato tubers to grow in. These “hills” or ridges are where the potatoes will form, and it is important to keep them covered and away from sunlight. If the potato tubers come in contact with sunlight they can become green and not fit to eat. In fact, green potatoes can carry toxins and could become poisonous. To prevent this, potatoes should be hilled at least 3 to 4 times during their growth cycle. The more you can hill t